WhatsApp us

Ceilings and partitions

False ceilings and partition walls

A false ceiling hides pipes and wiring and holds cove lights. A gypsum partition wall splits a room fast. We quote both in writing and check the HDB rules for you.

  • HDB permit applied for where needed
  • Written price before any work starts
  • Renovation workmanship under warranty for 12 months
  • False ceiling, flat gypsumQuote
  • L-box ceilingQuote
  • Gypsum partition wallfrom S$550

Ceiling and partition work we do

Three main jobs, plus the lights that go in them. Each job has a starting price, and each follows different HDB rules.

  • Flat gypsum false ceiling

    A flat ceiling dropped below the slab, to hide pipes and wiring or to make the room look neater. Priced per square foot.

    from S$7 psf
  • L-box ceiling and cove lighting

    A flat ceiling with a dropped edge, the L-box, around the room. Cove lights sit in it and glow upward along the wall.

    from S$11 psf
  • Gypsum partition wall

    A new wall that splits a room for a study, a nursery or a walk-in wardrobe. Priced per standard wall.

    from S$550
  • Lights in the new ceiling

    Downlights and cove lights wired by an EMA Licensed Electrical Worker, so the ceiling and the lighting are planned together.

False ceiling in Singapore: what you are paying for

A false ceiling is a second ceiling fitted below the concrete slab. People fit one to hide wiring and pipes, to hold lights, or because the bare slab looks plain. The ceiling is hung from the slab on a metal grid and covered in gypsum board, which is then painted.

The simplest version is flat and priced per square foot. An L-box adds a dropped edge around the room, which gives you a slot for cove lighting. In both cases you pay for the boards, the grid, the labour and the finishing, and your written quote lists what is in it.

Prices are for labour, starting from. Parts are extra and listed on your written quote, so you see the full price before we start. Wiring for lights in the ceiling is a separate job done by an electrician, and we plan it with you at the start.

What a false ceiling is made of

A false ceiling is built up in layers below the concrete slab. Each number below is one part.

  1. Concrete ceiling slab. The structure above; nothing is changed here.
  2. Hangers. The rods that carry the ceiling from the slab.
  3. Metal grid. The frame the boards are fixed to.
  4. Gypsum board. The flat surface, finished and painted.
  5. L-box. The dropped edge around the room.
  6. Cove light. Lighting set into the L-box, wired by an electrician.

False ceiling and partition wall prices

Starting prices for the work. Your written quote lists the exact size, the finish and any lights.

  • False ceiling, flat gypsumHDB-registered contractor
    from S$7 psf
  • L-box ceilingHDB-registered contractor
    from S$11 psf
  • Gypsum partition wallper standard wallHDB-registered contractor
    from S$550

Minimum charge S$80 per visit. Bigger jobs get a fixed written quote after a free look at photos, or after a site visit.

Who does the work, permits and warranty

Who does the work

In HDB flats, false ceilings and partitions are built by an HDB-registered renovation contractor. An EMA Licensed Electrical Worker (LEW) does all wiring, including lights in the ceiling.

HDB permit

A false ceiling needs an HDB renovation permit, which our HDB-registered contractor applies for. A gypsum partition wall needs no HDB permit.

Sometimes needed

Warranty

12 months

Workmanship warranty on this work.

How a ceiling or partition job works

  1. 1

    Send photos and sizes

    The room, its size, the ceiling height and what you want in it.

  2. 2

    We visit and quote

    We measure, check the HDB rules for your flat and give a written quote.

  3. 3

    Permit and build

    Our contractor applies for the permit where needed, then builds the frame and boards.

  4. 4

    Finish and check

    The joints are finished and painted. You check the work, then pay.

HDB rules for a false ceiling and a partition wall

HDB sets rules on how a ceiling is built. There must be at least 2.4 m of clearance under it, except in toilets and bathrooms. The materials must not burn, a gas pipe cannot be boxed in, and fasteners are limited to 6 mm across and 40 mm deep into the slab. HDB does not allow the original pitched-roof ceiling to be removed, or a ceiling to be plastered.

Adding a false ceiling on top of an existing HDB false ceiling, without changing how it is supported, needs no permit. A new one does. Buildings completed before 1991 may contain asbestos, so ask NEA if you are unsure of your ceiling.

A gypsum partition needs no HDB permit, but a partition made of combustible or toxic materials is not allowed. Taking down a lightweight wall does need a permit. In a condo, check the management office's renovation rules too.

What changes the price of a false ceiling

  • The area. False ceilings are priced per square foot, so the rooms you include decide the total.
  • The type. A flat ceiling costs less than an L-box (from S$11 psf), because the L-box has more boards and framing.
  • The lights. Downlights and cove lights are wired by an electrician and quoted with the lighting. See lights and ceiling fans.
  • The finish. Painting the ceiling is a separate line unless you ask us to include it: see painting.
  • The partition. A partition is priced per standard wall, so a longer or taller wall costs more.

Before the ceiling team arrives

Clear the areas we will work in, and cover furniture that has to stay. Tell us where the air-conditioning units and pipes are, because the ceiling is built around them.

Take a photo of the ceiling and tell us the height, so we can check the clearance rule. If you want cove lighting or a partition with a glass panel, say so now: see glass partitions.

Dust and some noise are part of the work, so ask us for the schedule to tell your neighbours.

Frequently asked questions

Do I need an HDB permit for a false ceiling?

Yes. Installing a false ceiling in an HDB flat needs a renovation permit. Our HDB-registered contractor applies for it. A gypsum partition wall does not need one.

How much does a false ceiling cost per square foot?

A flat gypsum false ceiling starts at from S$7 psf and an L-box ceiling at from S$11 psf. Your written quote shows the exact area and what is included.

What is the difference between a false ceiling and an L-box?

A flat false ceiling is one level below the slab. An L-box adds a dropped edge around the room, which can hold cove lighting and give the room a stepped look.

Can you build a partition wall in my HDB flat?

Yes. A gypsum partition needs no HDB permit and starts at from S$550, per standard wall. Our HDB-registered contractor does the work in HDB flats.

Who does the wiring for cove lights?

An EMA Licensed Electrical Worker (LEW), as the law requires for fixed wiring. We plan the ceiling and the lights together, so the electrician's work is in the same quote.

Is there a minimum ceiling height?

Yes. HDB requires at least 2.4 m of clearance below a false ceiling, except in toilets and bathrooms. Send the ceiling height with your photos so we can check it.

Send a photo. Get a fixed price.

WhatsApp us a photo or a short video of the problem, with your postal code. We reply with a price the same working day.

  1. Send a photoWhatsApp us a photo or a short video of the problem, with your postal code.
  2. Get a fixed priceWe reply with a price, or book a visit when a job needs a look first.
  3. We fix itThe right tradesman for the job arrives in the time slot you booked.
  4. Pay when it's donePay by PayNow or card after the work is finished and you have checked it.
WhatsAppGet a price