WhatsApp us

Guide

Power trip at home: what to do first

When the power trips at home, switch off your appliances, then reset the breaker once. If it trips again, stop and call an EMA Licensed Electrical Worker. Here is why it happens.

Updated 21 Nov 2026 · 6 min read

Key facts

  • A trip means the DB box sensed a problem: it is protecting you.
  • Unplug or switch off appliances first, then reset the breaker once.
  • If it trips again straight away, stop and call a Licensed Electrical Worker.
  • Never remove a DB box cover or touch the wiring yourself.
On this page
  1. Power trip at home: what to do first
  2. What the DB box is showing you
  3. What causes a power trip
  4. Why your RCCB keeps tripping
  5. When to stop and call an electrician
  6. What to tell the electrician
  7. Who may fix the problem

Power trip at home: what to do first

A power trip is the sudden loss of power in part or all of your home, usually with a click from the DB box. It looks alarming, but it is a safety device doing its job. Something drew too much current, or some current leaked where it should not.

Do these steps in order, and stop at any point if something feels wrong:

  1. Stay calm and keep dry. Do not touch the DB box with wet hands or stand in water.
  2. Switch off or unplug appliances on the circuit that tripped, or all of them if the whole home is off. Heaters, kettles, irons and aircons are the usual suspects.
  3. Look at the DB box. Find the breaker that is in the down position, or is not in line with the others. If the box has a cover, use only the door made for you to open, and never remove a panel. If you smell burning or see scorch marks or water near the box, do not touch it: call an electrician.
  4. Switch it back on once. If the power stays on, plug appliances back in one at a time. If one trips it again, that appliance is the likely problem: unplug it and keep it unplugged until it has been checked.
  5. If it trips again straight away with everything unplugged, leave it off and call an electrician.

Our power trip and DB box page lists prices and how a visit goes.

What the DB box is showing you

The DB box is the panel that holds your circuit breakers. These are the parts you will see.

  1. Main switch: turns off the power to the whole home
  2. RCCB (earth-leakage breaker, with test button): trips if current leaks to earth
  3. MCBs, one per circuit: each protects one set of lights or sockets
  4. The tripped MCB: sits in the down position, showing which circuit tripped
  5. Cable entry: where the supply and the circuit cables go in

What causes a power trip

The usual causes at home fall into four groups.

  • A faulty or overloaded appliance. A heater, hair dryer or old fridge may draw too much current or develop a fault inside. Too much current usually trips an MCB; a fault that leaks current to earth trips the RCCB.
  • Moisture. Water in a socket, a light fitting, an outdoor point or an appliance can leak current to earth. This usually trips the RCCB.
  • Worn wiring or a worn breaker. Older homes can have loose connections or ageing parts that trip at random.
  • Too much on one circuit. Running several heavy appliances at once on the same circuit can overload it.

If you cannot tell which it is, an electrician checks the circuits one at a time. See electrician services for what a visit includes.

Why your RCCB keeps tripping

The RCCB (earth-leakage breaker) is the switch with a test button. It watches for current going to earth, such as through a person or a wet fitting, and cuts the power fast. Because it is designed to be sensitive, a small leak, such as damp in one fitting, is enough to trip it.

If your RCCB keeps tripping, the cause is often one appliance or one circuit with a leak: a water heater, a washing machine, a cracked socket or a fitting with moisture in it. Unplug the appliances and reset the RCCB once. If it stays on, plug things back in one at a time, as in the steps above. If it trips again with everything unplugged, the leak is probably in the wiring or in something wired in, such as a water heater. Leave it off and call an LEW, who tests the circuits one by one.

Do not tape the switch down or keep forcing it on. That removes the protection it gives you. Stop and call an LEW.

When to stop and call an electrician

  • The breaker trips again straight away after you switch it on.
  • You smell burning or see scorch marks on a socket, switch or the DB box.
  • A socket, switch or the DB box feels hot, or there is a buzzing sound.
  • The trip happens during rain, or there is water near a socket or the box.
  • You have to keep resetting the same breaker every day.
  • You are tempted to remove a DB box cover or touch the wiring.

What to tell the electrician

A few details save time and often save a second visit. Note which breaker tripped: the RCCB, or one of the MCBs, and which one. Say what was switched on at the time, and whether it happens once a day, only at certain hours or only when it rains.

Take a photo of the DB box with the tripped breaker in view. If one appliance seems to be the cause, say which, and leave it unplugged until the electrician has seen it.

Habits that help

Spread heavy appliances across circuits instead of running several together. Keep water away from sockets, and do not use a socket that is cracked, warm or discoloured. If an appliance has a damaged cable, stop using it until it has been repaired or replaced.

Who may fix the problem

In Singapore, fixed wiring, power points, switches and the DB box may only be worked on by an EMA Licensed Electrical Worker (LEW). Changing a bulb or plugging in an appliance does not need one, unless the wiring is touched.

In HDB flats, HDB tells owners to use an LEW for all electrical work. New wiring must be tested by SP Services, and some work needs an HDB electrical permit that the LEW applies for.

LEWs are scarce: about 3,700 in Singapore, with some 1,400 of them aged 60 or older. When the power is off, the earliest slot matters. Send us a photo of the DB box and your postal code on WhatsApp. If a water heater is the cause, our water heater page explains the replacement. For urgent leaks and power trips, message us any time.

Frequently asked questions

Why does my power trip when I switch on the water heater?

A heater can leak current to earth if it has a fault or moisture inside, and that trips the RCCB. Switch it off at its isolator and call an LEW. Do not keep resetting it.

Is it safe to reset the breaker myself?

Usually, once, with dry hands and appliances switched off. If it trips again straight away, stop. Never remove a DB box cover or touch the wiring.

Why does my power trip at night or when it rains?

Rain can put moisture into outdoor or balcony sockets and fittings, which leaks current to earth. At night, several heavy appliances running together can overload a circuit. A trip that follows the weather is worth a visit from an electrician.

Do I need to replace my DB box after a power trip?

Not usually. Most trips come from an appliance, a circuit or one breaker. An electrician checks first, and only recommends a new board when the check shows it is needed.

Who can I call for a power trip in Singapore?

Call an EMA Licensed Electrical Worker. For urgent leaks and power trips, message us any time. We send the earliest LEW we can, with a price in writing first.

Send a photo. Get a fixed price.

WhatsApp us a photo or a short video of the problem, with your postal code. We reply with a price the same working day.

  1. Send a photoWhatsApp us a photo or a short video of the problem, with your postal code.
  2. Get a fixed priceWe reply with a price, or book a visit when a job needs a look first.
  3. We fix itThe right tradesman for the job arrives in the time slot you booked.
  4. Pay when it's donePay by PayNow or card after the work is finished and you have checked it.
WhatsAppGet a price